Function Key for Macro

Functions > Macro > Function Key for Macro

Function Key for Macro

Press the key while the telephone is in the idle state to execute a macro. If the H command (hang-up/pickup with the hook key) is located at the beginning of a macro, the macro saved in the system is executed immediately. If this is not the case, you need to first confirm the start of macro execution.

Proceed as follows:

•

Using COMfortel Set by selecting Macro

•

Using the telephone by selecting macro

Configuration with COMfortel Set


Up to 100 characters for a max. of 10 keys, up to 40 characters for additional keys
The following commands:
Z [digit sequence]	Digit sequence selection including * and #
W [digits 1-5]	Waiting time/pause time of 1-5 seconds
K	Switchover to keypad
M	Switchover to DTMF
H	Hang-up/pickup with the hook key
C	Wait for a connection

If you want to configure a programming function on the PBX as a macro, enter a pause between the password and programming code sequence.

Pauses cannot be entered at the beginning of a macro.

The maximum pause time is 5 seconds. This restriction does not apply for the C command (waiting for a connection).

Configuration with the Telephone


Up to 100 characters for a max. of 10 keys, up to 40 characters for additional keys
The following commands:
Z [digit sequence]	Digit sequence selection including * and #
W [digits 1-5]	Waiting time/pause time of 1-5 seconds
K	Switchover to keypad
M	Switchover to DTMF
H	Hang-up/pickup with the hook key
C	Wait for a connection

If you want to configure a programming function on the PBX as a macro, enter a pause between the password and programming code sequence.

Pauses cannot be entered at the beginning of a macro.

The maximum pause time is 5 seconds. This restriction does not apply for the C command (waiting for a connection).

COMfortel 1200 - Firmware V2.0 - COMfortel Set V3.14 - Advanced Information V06 03/2017