Functions > Do-not-disturb > Type of Do-not-disturb

Type of Do-not-disturb
Important: Only available for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX. On the other PBXs only the Do-not-disturb function of the PBX will be supported (see Advanced Information of the PBX).
Defining the do-not-disturb type function determines how do-not-disturb works when it is enabled.
All (PBX): The do-not-disturb function is carried out via the PBX. All incoming calls are rejected and not entered in the caller list on the telephone.
Reject anonymous: All anonymous calls are rejected.
Only contacts: All calls are rejected except for calls from contacts listed in the telephone book.
All (telephone): The do-not-disturb function is carried out via the telephone. All incoming calls are rejected and entered in the caller list on the telephone.
Note:
Parallel to the do-not disturb type, all (PBX), the call deblocker (incoming) can be enabled so that the VIP numbers registered in the call deblocker on the PBX are not rejected.
Internal telephone calls are only rejected if the do-not disturb type function all (PBX) and all (telephone) are used. An internal subscriber can reach a protected telephone in an emergency with a priority call if the do-not disturb type function all (PBX) is used. Calls are only registered in the caller list on the telephone if the do-not disturb type function all (telephone) is used.
 
 
Proceed as follows:
Using COMfortel Set (page Settings/functions > Do-not-disturb)
Using the telephone (menu settings > do-not-disturb > kind do-not-dist)

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019