Switching Follow-me On/Off

Important: Not available for operation on the PBX COMpact 3000 analogue/ISDN/VoIP.

Proceed as follows:

•

Using the telephone

Requirements:

•

Authorisation in the PBX for Controlling of the PBX using the telephone

•

Authorisation in the PBX for CF (groups) / Follow-me

Press the Menu key and open the menu functions > follow-me.

Alternatively, press a function key configured for Follow-me.

Select one of the following options:

deactivate all: Disables all of the currently enabled Follow-me functions. (No other action is required.)

switch on: Enables Follow-me for a subscriber.

switch off: Disables follow-me for a subscriber.

Note: For operation on the PBXs COMpact 2206 USB and COMpact 4410 USB, it is not possible to switch off the follow-me function for a single subscriber. For this reason, the switch off option is not available. The switch on option, on the other hand, is replaced by the following step.

Select the subscriber whose calls should be rerouted using his name/number.

Note: Follow-me can also be disabled on the forwarded telephone by using "Switch off follow-me" for the subscriber's own phone number (for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX) or "CF subscriber" (for operation on the PBXs COMpact 2206 USB and COMpact 4410 USB).

Press the OK key.