Functions > Hotel Function > Configuring the Hotel Function

Configuring the Hotel Function
Important: Only available for operation on the PBXs COMpact 4410 USB, COMpact 5020 VoIP, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX.
The hotel function is configured as described in the following.
Important: Activating is done with an unblocking code that you can acquire from the Auerswald/FONtevo online shop. For operation on the PBXs COMmander 6000/R/RX, the number of available hotel telephones (reception and room telephones) must be activated. For operation on the PBX COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMpact 5020 VoIP the hotel function only needs to be activated once.
Note:
It is not possible to use the system telephone as a waiting field reception and as a reception telephone at the same time.
For operation on the PBX COMpact 4410 USB, a max. of 1 hotel reception telephone is possible.
 
Note:
If a check-in or check-out operation is in progress, the hotel reception telephone is not accessible for incoming calls during this period of time. It is recommended to configure call forwarding on busy for cases like this.
Note that the option of entering internal calls into the caller list must be activated if the hotel reception telephone should inform hotel guests of why their calls could not go through.
 
Note: In order to avoid misunderstandings when querying call charges, the value configured in COMfortel Set for the cost per call unit must correspond with the value configured in the PBX.

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019