Functions > Call Forwarding > Switching Call Forwarding for External Numbers On/Off

Switching Call Forwarding for External Numbers On/Off
Important: Only available for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX. On the other PBXs this function can be set via programming sequence (see Advanced Information of the PBX).
Proceed as follows:
 
Requirements:
Authorisation assigned in the PBX for Features to be configured by the network provider (CF, keypad)
 
To enable or disable call forwarding for external numbers, press the function key configured for call forwarding (external numbers).
Alternatively, proceed as described below.
1.
Press the Menu key and open the menu functions > CF ext.no..
2.
current conf.: Switches permanent configuration off and the current condition on.)
deactivate all: Disables all currently enabled call forwarding for external numbers. The prerequisite is that function keys have been configured for these instances of call forwarding. (No other action is required.)
unconditional: Switches call forwarding unconditional for external numbers on or off.
on busy: Switches call forwarding on busy for external numbers on or off.
on no reply: Switches call forwarding on no reply for external numbers on or off.
3.
4.
switch on: Enables call forwarding for external numbers.
For current configuration: Switches the current configuration on and the permanent configuration off. (No other action is required.)
switch off: Disables call forwarding for external numbers. (No other action is required.)
For current configuration: Switches the current configuration off and the permanent configuration on. (No other action is required.)
Note: If you press the telephone book key before entering the destination number, you can select the desired phone number from the telephone book.
5.

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019