Functions > Text before Answering > Function Key for Text before Answering for external number
Function Key for Text before Answering for external number
Important: This function is only available for operation on the PBX COMpact 4410 USB.
Press the key while the telephone is the idle state to switch text before answering for the configured phone number on or off or to switch it over.
In addition the status of the function is indicated by the corresponding LED.
 
LED signalling on the key:
Green
The text before answering function for the configured phone number is enabled.
Off
The text before answering function for the configured phone number is disabled.
Note: When functions are defined on the second key level (optional, see Technical Data in the Instructions), LED signalling is not available.
 
Requirements for operating the function:
•
Text before answering announcement saved on the PBX
 
Proceed as follows by assigning the function key:
•
Using COMfortel Set by selecting Text before answering
•
Using the telephone by selecting text bef. answer menu
Note: For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
 
Configuration with COMfortel Set
 
Your own exchange line – Telephone no 
external number on the PBX.
 
 
Configuration with the Telephone
 
Telephone no
external number on the PBX.
COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019