Basic Knowledge > Introduction to the Operation > Main Menu

Main Menu
Press the Menu key to open the main menu with various menus.
Press the arrow keys to scroll through the selection list.
Press the OK key to go to the next menu.
In the functions menu, you can activate/deactivate or execute functions in the PBX and the telephone (for example, do-not-disturb or the telephone lock).
The information menu is only used to display information (for example, versions, accumulated charges and the status of certain important functions/settings). No changes can be made here.
In the define keys menu, you can assign functions on the PBX and the telephone to programmable function keys (for example, do-not-disturb or speed dialling).
In the settings menu, you can configure the telephone.
In the answer.machine menu, you can configure and operate the local answering machine.
In the diagnosis menu, you can perfom diagnosic functions.
In the voice mailbox menu, you can configure and operate a voice mailbox in the PBX.
In the submenus, you can scroll through the selection lists pressing the arrow keys just as you can in the main menu. Press the OK key to again go to the next menu.
To go back to the preceding menu level, press the back key. To go back into the idle state, press the home key. In addition, the telephone automatically switches back into the idle state if no keys are pressed within a period of 30 seconds.
Important:
Some functions are not offered until the function is available on the PBX and has been configured, and if necessary, an authority level has been granted for the use of this function.
The functions and settings available in the menus functions, define keys, settings and voice mailbox can be restricted by the administrator to prevent unauthorised use. The release and display of these disabled functions in to the selection list requires entering the corresponding PIN after selecting additional. The release remains intact during the settings that now follow. The release is revoked if no keys are pressed within a time period of 60 seconds. You can actively disable the release by selecting log out in the menu settings > blocking > additional.
 

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019