Basic Knowledge > Configuration Software COMfortel Set > Opening Configuration

Opening Configuration
You can open the configuration of the telephone or a configuration file saved on the hard disk.
Note: Since the administrator may block parts of the system telephone, you may not be able to make all settings on a telephone if you are logged in as a user or a sub-administrator (see chapter Settings > Protection from Unauthorised Access.
Opening the Telephone Configuration
Requirements:
 
1.
Click Open or open the menu File > Open.
2.
Click Telephone.
The Connection routes dialogue with the devices connected via the interface configured above opens.
3.
The PIN entry dialogue opens.
Note: For operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX access to the telephone is only possible via the 6-digit PIN assigned in the PBX. You need to first select which PIN you want to enter based on the authority level: the Admin PIN, one of the subadmin PINs or the user PIN that belongs to the telephone.
4.
The configuration is loaded from the telephone. This may take a while.
Opening a Configuration File
Requirements:
 
In order to open one of the files previously saved with this program, open the menu File > Related files and select the file.
Alternatively, proceed as described below.
1.
Click Open or open the menu File > Open.
2.
Click File.
A dialogue for selecting the file with the configuration data opens.
3.
4.
Click Open (this text is dependent on the operating system used).

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019