Basic Knowledge > Configuration Software COMfortel Set > Saving Configuration

Saving Configuration
The configuration can be saved on one or more telephone(s) or as a file on the PC.
Saving Configuration on one or more Telephones
Requirements:
 
1.
Click Save or open the menu File > Save.
2.
Click Telephone.
The Connection routes dialogue with the devices connected via the interface configured above opens.
Note: To select several end devices, hold the Ctrl or Shift key during selection. Double-clicking the folder symbol displays additional devices.
3.
The PIN entry dialogue opens.
Note: For operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX access to the telephone is only possible via the 6-digit PIN assigned in the PBX. You need to first select which PIN you want to enter based on the authority level: the Admin PIN, one of the subadmin PINs or the user PIN that belongs to the telephone.
4.
5.
The configuration has sucessfully been transmitted to all selected devices.
Saving Configuration File on PC
 
Important:
Note the following legal notes before creating the data backup.
The data backup contains the following legally protected components:
- Configuration of the telephone
- Names of internal subscribers
- Address book of the telephone
- Connection data sets containing destination, source and time information of a telecommunication connection
Before the data backup is created, all telephone users must be informed that these data will be forwarded and must also be informed about who will use the received data. It is absolutely necessary to store the data safely and in accordance with the legal requirements.
If you want to make the data backup available to your specialised dealer or to the manufacturer for error analysis, you must make sure that the legal requirements are fulfilled.
 
1.
Click Save or open the menu File > Save.
Hinweis: To export the configuration for another telephone, open COMfortel Set and select the menu Service > Export....
2.
Click File.
3.
A file location dialogue opens.
4.
5.
Enter a name for the *.cf2 file and click Save (this text is dependent on the operating system used).

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019