Telephoning > Call Waiting Calls > Forwarding Call Waiting

Forwarding Call Waiting
Important: Only available for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX.
Requirements:
 
When call waiting signals an incoming call, proceed as described in the following.
1.
Select call deflection and confirm with OK.
2.
Enter the destination number or press the telephone book key to select the phone number you want in the telephone book.
Important: If you must prefix e.g. an exchange line access number when entering/selecting a phone number, depends on the exchange line request (automatic, direct exchange line telephone, internal telephone) that was configured in the PBX (see Advanced Information of the PBX).
 
3.
The subscriber is called.
Note: If the destination number is saved on the programmable function key (speed dialling key), you can forward the call by simply pressing this key and then confirming with OK. The previous function selection via the display is no longer applicable.

COMfortel 1200 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019