Configuring Ringtones

You have the option of assigning the several call types each a specific ringtone using the telephone.

In addition to making call type-dependent assignments, COMfortel Set can also be used to configure which ringtone to assign to each of 10 separate external numbers or groups depending on the number.

Proceed as follows:

•

Using COMfortel Set

•

Using the telephone

Using COMfortel Set to Configure Call Type-dependent Ringtones

Open the page Settings/functions > Signalling/ringer.

Click the Ringtones (call type-dependent) tab.

Select the desired ringtone from the list field of call types in question.

Using COMfortel Set to Configure Number-dependent Ringtones

Open the page Settings/functions > Signalling/ringer.

Click the Ringtones (number-dependent) tab.

In the Group number 1 to Group number 10 entry field, enter the phone numbers of the group and select the desired ringtone from the list field.

In the external numbers 1 to external numbers 10 entry field, enter each of your external numbers and select the desired ringtone in the list field.

Important: Only available for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX.

Using the Telephone to Configure Call Type-dependent Ringtones

Press the Menu key and open the menu settings > signalling > ringtone.

Select the desired call type.

You hear the currently configured ringtone. The associated name is shown in the display.

Select the desired ringtone.

You hear the displayed ringtone to see if you like it.

Select the desired test volume by pressing the plus/minus keys and confirm with OK.

Note: At this point, you can only change the volume during testing. To change the volume of the actual ringtone, press the plus/minus keys in the idle state of the telephone.

You now have option of configuring the ringtone for another call type.