Functions > Do-not-disturb > Function Key for Do-not-disturb
Function Key for Do-not-disturb
Press the key to switch the do-not-disturb function on or off or to switch it over.
In addition the status of the function is indicated by the corresponding LED.
 
LED signalling on the key:
Yellow
The do-not-disturb function is enabled.
Off
The do-not-disturb function is disabled.
Note: When functions are defined on the second key level (optional, see Technical Data in the Instructions), LED signalling is not available.
 
Requirements for operating the function:
•
Authorisation in the PBX for Controlling of the PBX using the telephone
 
Proceed as follows by assigning the function key:
•
Using COMfortel Set by selecting Do-not-disturb
•
Using the telephone by selecting do-not-disturb
Note: For further information about the general procedures when assigning function keys, see Function Keys.
 
COMfortel 1600 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V10 02/2019