Switching Call Forwarding for Subscribers On/Off

Proceed as follows:

•

Using the telephone

Requirements:

•

Authorisation in the PBX for Controlling of the PBX using the telephone

•

For external destination numbers: Authorisation assigned in the PBX for Configuring CF (sub) to ext. number

To enable or disable call forwarding for subscribers, press the function key configured for call forwarding (subscribers).

Alternatively, proceed as described below.

Press the Menu key and open the menu functions > Call fwd.:scr.

Select one of the following options:

deactivate all: Disables all currently enabled call forwarding for subscribers. (No other action is required.)

unconditional: Switches call forwarding unconditional for subscribers on or off.

on busy: Switches call forwarding on busy for subscribers on or off.

on no reply: Switches call forwarding on no reply for subscribers on or off.

Select one of the following options:

switch on: Enables call forwarding for subscribers.

switch off: Disables call forwarding for subscribers. (No other action is required.)

Note: If you press the telephone book key before entering the destination number, you can select the desired phone number from the telephone book.

Enter the destination number and confirm with OK.

Important: If you must prefix e.g. an exchange line access number when entering/selecting a phone number, depends on the exchange line request (automatic, direct exchange line telephone, internal telephone) that was configured in the PBX (see Advanced Information of the PBX).