Switching Call Forwarding for External Numbers On/Off

Important: Only available for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX. On the other PBXs this function can be set via programming sequence (see Advanced Information of the PBX).

Proceed as follows:

•

Using the telephone

Requirements:

•

Authorisation assigned in the PBX for Features to be configured by the network provider (CF, keypad)

To enable or disable call forwarding for external numbers, press the function key configured for call forwarding (external numbers).

Alternatively, proceed as described below.

Press the Menu key and open the menu functions > CF ext.no..

Select one of the following options:

current conf.: Switches permanent configuration off and the current condition on.)

deactivate all: Disables all currently enabled call forwarding for external numbers. The prerequisite is that function keys have been configured for these instances of call forwarding. (No other action is required.)

unconditional: Switches call forwarding unconditional for external numbers on or off.

on busy: Switches call forwarding on busy for external numbers on or off.

on no reply: Switches call forwarding on no reply for external numbers on or off.

Enter the external phone number to be forwarded on the PBX (without an exchange line access number and with a area code) and confirm with OK.

Select one of the following options:

switch on: Enables call forwarding for external numbers.

For current configuration: Switches the current configuration on and the permanent configuration off. (No other action is required.)

switch off: Disables call forwarding for external numbers. (No other action is required.)

For current configuration: Switches the current configuration off and the permanent configuration on. (No other action is required.)

Note: If you press the telephone book key before entering the destination number, you can select the desired phone number from the telephone book.

Enter the destination number (with exchange line access number, exception: automatic exchange line request was configured in the PBX) and confirm with OK.