Functions > Door Functions > Function Key for Door Functions
Function Key for Door Functions
Important: Not available for operation on the PBX COMpact 3000 analogue/ISDN/VoIP.
Press the key for general functions while the telephone is in the idle state to open the door function menu. After this, you can initiate a door function for the configured door.
Press the key defined to initiate a call connection with the door (after picking up the receiver) or to switch on the door opener and/or light.
In addition the status of the function is indicated by the corresponding LED.
 
LED signalling on the key (only for defined key assignment):
Green
The door opener function is enabled.
The door opener function is enabled and the light is switched on (only when both functions are configured on the key).
Yellow
The light is switched on.
Off
None of the functions configured on the key are enabled.
Note: When functions are defined on the second key level (optional, see Technical Data in the Instructions), LED signalling is not available.
 
Requirements for operating the function:
•
The authority level assigned in the PBX for the door terminal
•
The relays configured in the PBX for the intercom, opening the door and the stairwell light
•
Authorisation in the PBX for Open door
 
Proceed as follows by assigning the function key:
•
Using COMfortel Set by selecting
–
Door terminal function
–
Defined door function
•
Using the telephone by selecting
–
door function
Note: For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
 
Configuration with COMfortel Set
 
Telephone no 
Phone number of the door.
 
Door terminal function
Open the door & switch on the light: Press the key to switch the door opener and the light on.
Open the door: Press the key to switch the door opener on.
Light on: Press the key to switch the light on.
Talking: Press the key to initiate a call connection to the door.
Note: The door terminal function Light on switches on the relay of the door terminal in question separately at the time configured in the PBX.
 
 
Configuration with the Telephone
 
general: Press the key to open the door function menu for the door configured.
defined: Press the key to execute the configured door function for the configured door.
 
Telephone no
Phone number of the door.
 
open door/light: Press the key to switch the door opener and the light on.
open door: Press the key to switch the door opener on.
light on: Press the key to switch the light on.
talk: Press the key to initiate a call connection to the door.
Notes: The door terminal function Light on switches on the relay of the door terminal in question separately at the time configured in the PBX.
 
COMfortel 1600 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V10 02/2019