Function Key for Internal Waiting Field

Functions > Waiting Field Function > Function Key for Internal Waiting Field

Important: Only available for operation on the PBXs COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX.

Note: A maximum of one internal waiting field key is possible on a single telephone.

Press the key to place the internal caller in the waiting field or establish a connection with the caller from the waiting field. Whether you press the key depends on the current status as displayed by the LED on the key. Refer to the description of LED signalling.

LED signalling on the key:
Green	There is currently a connection with an internal subscriber. Information about the communication partner is shown on the display: (If other waiting field receptions have been enabled, the communication partners for these are not signalled.) Press the key once to place the communication partner in the waiting field.
Yellow	An internal subscriber is on hold in the waiting field. Information about the calls waiting are shown on the display: (If other waiting field receptions have been enabled, the calls waiting in these are not signalled.) Press the key once to establish a connection to the call waiting.
Red	An internal subscriber is on hold in the waiting field. (If other waiting field receptions have been enabled, the calls waiting in these are not signalled.) Press the key once to display information about the call waiting – if no call is in progress.
Yellow (blinking)	An internal subscriber is calling. Information about the caller is shown on the display: Press the key once to place the caller in the waiting field. Press the key twice to establish a connection to the caller.
Red (blinking)	An internal subscriber is calling. Press the key once to place the caller in the waiting field.

Requirements for operating the function:

•

The telephone has been selected in the PBX as a waiting field reception

Proceed as follows by assigning the function key:

•

Using COMfortel Set by selecting Waiting field (internal)

•

Using the telephone by selecting waiting field > internal

Note: For further information about the general procedures when assigning function keys, see Function Keys.