Opening Configuration

You can open the configuration of the telephone or a configuration file saved on the hard disk.

Note: Since the administrator may block parts of the system telephone, you may not be able to make all settings on a telephone if you are logged in as a user or a sub-administrator (see chapter Settings > Protection from Unauthorised Access.

Opening the Telephone Configuration

Requirements:

•

An existing PC connection configured correctly in COMfortel Set to a PC interface on the PBX or another connected system telephone

•

MSN configured for the system telephone

•

Knowledge of the required PIN

Click Open or open the menu File > Open.

Click Telephone.

The Connection routes dialogue with the devices connected via the interface configured above opens.

Select the telephone whose configuration you want to open and click OK.

The PIN entry dialogue opens.

Note: For operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX access to the telephone is only possible via the 6-digit PIN assigned in the PBX. You need to first select which PIN you want to enter based on the authority level: the Admin PIN, one of the subadmin PINs or the user PIN that belongs to the telephone.

Enter the associated PIN and click OK.

The configuration is loaded from the telephone. This may take a while.

Opening a Configuration File

Requirements:

•

Configuration file (*.cf2) saved on the hard disk

In order to open one of the files previously saved with this program, open the menu File > Related files and select the file.

Alternatively, proceed as described below.

Click Open or open the menu File > Open.

Click File.

A dialogue for selecting the file with the configuration data opens.

Switch to the directory where the file is located and select the file.

Click Open (this text is dependent on the operating system used).