Dialling Telephone Number on Direct Exchange Line Access

•

Telephone is configured as a direct exchange access point via the PBX

In order to dial an external number on a direct exchange line access point, pick up the receiver and enter the external number without the exchange line access number.

In order to carry out other call types (for example, internal or short-code), proceed as described in the following.

Pick up the receiver or press the hook key.

You will hear the external dial tone.

Select internal.

You will hear the internal dial tone.

Dial an internal number.

Once you have finished dialling the phone number, the subscriber is called.

Note: If you want to use dial preparation or, for example, make an entry in the telephone book or configure a speed dialling key, you must press the star key twice beforehand for internal and short-code calls.