Voice Mail and Fax Boxes of the PBX > Readiness of Voice Mail/Fax Boxes > Function Key for Readiness
Function Key for Readiness
Press the generally assigned key to permanently switch the readiness of a voice mail/fax box to be selected on or off.
Press the defined and assigned key to switch a previously defined voice mail/fax box on or off or switch it over.
In addition the status of the function is indicated by the corresponding LED.
 
LED signalling on the key:
Green
Readiness is enabled.
Yellow
The readiness of at least one box has been switched off (only in case of general assignment).
The readiness of the box is switched on, but the permanent configuration is inactive (only in case of defined assignment).
Off
Readiness is disabled.
Note: When functions are defined on the second key level (optional, see Technical Data in the Instructions), LED signalling is not available.
 
Requirements for operating the function:
•
Voice mail/fax box which is configured in the PBX and assigned to the telephone
 
Proceed as follows by assigning the function key:
•
Using COMfortel Set by selecting
–
voice mailbox - readiness
–
voice mailbox - readiness defined
•
Using the telephone by selecting
–
VMB readiness
Note: For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
 
Configuration with COMfortel Set
 
Voice mailbox – Telephone no 
Phone number of the box whose function shall be switched.
 
 
Configuration with the Telephone
 
Telephone no
Phone number of the box whose function shall be switched.
 
general: Press the key to open a selection list where the box to be switched can be selected.
defined: If you press the key, the selected box will be switched into readiness mode.
COMfortel 1600 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V10 02/2019