Voice Mail and Fax Boxes of the PBX > Configuration-Dependent Control > Function Key for Configuration-Dependent Control
Function Key for Configuration-Dependent Control
Press the generally assigned key to enable configuration-dependent control for a voice mail/fax box, which remains to be selected.
Press the defined and assigned key to enable configuration-dependent control for a previously defined voice mail/fax box.
In addition the status of the function is indicated by the corresponding LED.
 
LED signalling on the key:
Green
Configuration-dependent control is enabled. The permanent configuration is inactive.
Off
Configuration-dependent control is disabled. The permanent configuration is active.
Note: When functions are defined on the second key level (optional, see Technical Data in the Instructions), LED signalling is not available.
 
Requirements for operating the function:
•
Voice mail/fax box configured in the PBX and assigned to the telephone
•
Configurations made in the PBX
 
Proceed as follows by assigning the function key:
•
Using COMfortel Set by selecting
–
voice mailbox - config.control
–
voice mailbox - config.control defined
•
Using the telephone by selecting
–
VMB config. control
Note: For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
 
Configuration with COMfortel Set
 
Voice mailbox – Telephone no 
Number of the box which is to be switched via the function key.
 
 
Configuration with the Telephone
 
Telephone no
Number of the box which is to be switched via the function key.
 
general: Press the key to open a selection list where the box to be switched can be selected.
defined: Press the key to enable configuration-dependent control for the selected voice mailbox.
COMfortel 1600 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V10 02/2019