Zurück


Settings > VoIP > Configuring the Outbound Proxy
Configuring the Outbound Proxy
The outbound proxy is an intermediate server that processes all VoIP requests and connections going to the provider (except for registration).
Configuration can be carried out as follows:
•
Separately for VoIP providers
•
Via the configuration manager
 
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in the Upgrade Center)
– Configuration manager, opened with sufficient authorisation
– A configured DNS server and, if necessary, an HTTP proxy server
 
1.
Open the page CONFIGURATION > Voice over IP (VoIP) > VoIP provider.
2.
Click in the line of the corresponding VoIP provider.
It opens the page Provider configuration > Provider.
3.
Under Outbound proxy, select one of the following options:
 
 
 
deactivated: Disables the outbound proxy. (No other action is required.)
 
 
automatically: Automatically determines an outbound proxy. (No other action is required.)
 
 
manual: Enables the entry of an outbound proxy.
4.
Enter the outbound proxy in the IP address or URL entry field under Outbound proxy. The following entries are possible:
 
 
 
IP address with a range of 0 to 255 (example: 123.123.123.123)
 
 
URL (example: www.outboundproxy.de)
5.
Enter the associated port number (Port) in the Port entry field under Outbound proxy. The following entries are possible:
 
 
 
1 to 65535
Note: The port 5060 is configured in the factory settings.
 
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0P - Installation, Operation and Configuration V05 12/2015