Functions > Targeted Exchange Line Access > Initiating Targeted Exchange Line Access (A – Function Key Exchange Line)

Initiating Targeted Exchange Line Access (A – Function Key Exchange Line)
Important: Only available for operation on the PBXs COMpact 3000 analogue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 4000, COMpact 5000/R, COMpact 5200/R, COMpact 5500R and COMmander 6000/R/RX.
Proceed as follows:
 
Requirements:
 
1.
Press a function key configured for targeted exchange line access.
2.
Important: If you must prefix e.g. an exchange line access number when entering/selecting a phone number, depends on the exchange line request (automatic, direct exchange line telephone, internal telephone) that was configured in the PBX (see Advanced Information of the PBX).
3.
The subscriber is called.
Note: If another call comes through before you have finished placing the call, the telephone will reject the targeted exchange line access for your next call.

COMfortel 1400 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019