Functions > Speed Dialling > Function Key for Speed Dialling

Function Key for Speed Dialling
Press the key while the telephone is in the idle state to transfer a phone number saved in a key to dial preparation – also additional information.
Exception: If the phone number saved is an internal phone number and is currently being called, you can carry out the Pickup function on this call.
After picking up the receiver, press the key to dial the phone number saved in the key.
Press the key during a call to put the active communication partner on hold and to dial the phone number saved in the key.
In addition, when a subscriber or a group number is defined, the status of the subscriber or group can be read from the corresponding LED.
Note: When functions are defined on the second key level (optional, see Technical Data in the Instructions), LED signalling is not available.
Proceed as follows by assigning the function key:
Note: For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
Configuration with COMfortel Set
Destination of the call diversionTelephone no  
Destination number.
Note: Click to accept a phone number from the telephone book in the Telephone no entry field.
Destination of the call diversionType of phone number 
Marks the phone number as internal or external number.
Configuration with the Telephone
Telephone no
Destination number.
Note: If you press the telephone book key before entering the destination number, you can select the desired phone number from the telephone book. Alternatively, you can press a configured speed dialling key to select the destination number.
Important: If you must prefix e.g. an exchange line access number when entering/selecting a phone number, depends on the exchange line request (automatic, direct exchange line telephone, internal telephone) that was configured in the PBX (see Advanced Information of the PBX).

COMfortel 1400 - Firmware V2.2 - COMfortel Set V3.16 - Advanced Information V07 02/2019