Function Key for Call Forwarding for Subscribers in the PBX

Press the key to which Ανακατεύθυνση κλήσης συμμετέχοντα σε ιδιωτικό τηλεφωνικό κέντρο has been assigned to switch call forwarding for subscribers for the configured destination in the PBX on or off, or toggle it.

The key assigned to switch off all call forwarding for subscribers (Απενεργοποίηση ανακατευθύνσεων κλήσης συμμετεχόντων (όλα)) switches off call forwarding for subscribers.

In addition, when functions are assigned on the first key level, the status of the function is indicated by the corresponding LED.


LED signalling on the key (not applicable if assigned with "deactivate all"):
red	Subscriber call forwarding is enabled for the configured destination.
yellow	Subscriber call forwarding is enabled for a different destination.
off	Subscriber call forwarding is disabled.

Requirements for using the function:

•

Telephone is system telephone on the PBX

Proceed as follows by assigning the function key:

•

Using the Configuration Manager by selecting Ανακατεύθυνση κλήσης συμμετέχοντα σε ιδιωτικό τηλεφωνικό κέντρο

•

Using the telephone by selecting Ανακατεύθυνση κλήσης συμμετέχοντα σε ιδιωτικό τηλεφωνικό κέντρο

Notes:

For further information about the general procedures when assigning function keys, see Function Keys.

Additional settings for this function key are described in the following.

Είδος ανακατεύθυνσης

αμέσως: "call forwarding (unconditional)" function for the subscriber

όταν είμαι απασχολημένος/η: "call forwarding (on busy)" function for the subscriber

εάν δεν απαντηθεί: "call forwarding (if not responding)" function for the subscriber

Προορισμός ανακατεύθυνσης

Enter destination number

Important:

If a destination number key is adopted from the telephone book, it must be changed, if necessary, by hand as the adopted phone number could contain invalid special characters (permitted are the special characters # and *).

Internal destination: The internal phone number without ** must be entered.

External destination: The exchange line access number must always be entered if the automatic exchange line request is disabled. If the automatic exchgange line request is enabled, the phone number must always be entered without exchange line access number.