Settings > Display > Settings Configuration Manager Display
Settings Configuration Manager Display
Proceed as follows:
•
Using the Configuration Manager (page Ajustes > Dispositivo > Pantalla)
Brightness
  Apagar la pantalla
 Display will be switched off in power save mode.
 Display will be dimmed in power save modede.
  Brillo automático (COMfortel 3600 IP)
 The automatic brightness is disabled. A regulator for setting the display brightness manually pops up.
 Brillo (COMfortel 1400 IP and 2600 IP)
Move the regulator to the left or right to reduce or raise the display brightness.
LED settings
  LED de mensajes
Parpadeo y luz fija Indicates new entries, or entries that have already been viewed.
Solo parpadeo Indicates new entries.
desactivar LED is always switched off.
  Señalización de buzones de fax
If you find the LED signals of the fax boxes disruptive or annoying, they can be switched off separately.
 New fax entries will be signalled.
  LED de pantalla (only COMfortel 1400 IP and 3600 IP)
The different telephone states can be set (e. g. missed calls, new messages, etc.). Configure which telephone state is to be signalled or if the signalling shall be switched off completely.
Mostrar llamadas y conversaciones Indicates the status of the call.
Mostrar llamadas, conversaciones y uso de auriculares Indicates the status of the call and the headset activation (only COMfortel 3600 IP).
Show alerting, calls and new messages: Indicates the status of the call and new messages.
desactivar LED is always switched off.
 
  Estado de registro del interlocutor VoIP
 If not registered on the PBX, the speed dialling key signals unregistered VoIP subscribers in yellow.
 No signalling of the registration status.
Idle state and Power Saving Mode
Modo de suspensión 
The selected time indicates after how many seconds/minutes without action the telephone switches into the idle state. Then, the display no longer reacts on touch. If No automático is selected, the telephone will not automatically be set into the idle state.
 
Configuration-dependent idle state
ID de configuración 
The telephone changes into the idle state if the PBX switches over into a specific configuration (e. g. night configuration).
Requirements:
•
Configured configuration in the PBX (see Advanced Information of the PBX)
•
Enabled Configuration switchover check box in the PBX
Enter the configuration ID of the configuration.
Note: To switch off the configuration-dependent idle state, delete the configuration ID in the ID de configuración entry filed and click OK.
 
 
Comportamiento del modo de ahorro de energía 
The selected time indicates after how many minutes in the idle state the power save mode will be switched on. The background lighting will then be dimmed or switched off completely and the LEDs are inactive (exception: message LED for missed calls).
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V03 12/2020