Functions > Call Forwarding > Function Key for Call Forwarding for External Phone Numbers

Function Key for Call Forwarding for External Phone Numbers
Press the key assigned to Desvío de llamadas número externo to switch call forwarding of external numbers for the configured destination on or off.
In addition, when functions are assigned on the first key level, the status of the function is indicated by the corresponding LED.
 
Important: When operating the function via the key, the success/failure of the operation is indicated by a change in colour on the LED. During the configuration in the public exchange (this takes from a few seconds up to a minute), the LED blinks yellow.
 
Requirements for using the function:
Features to be configured by the network provider (fwd, keypad) permission granted in the PBX
 
Proceed as follows by assigning the function key:
Using the Configuration Manager by selecting Desvío de llamadas número externo
Using the telephone by selecting Desvío de llamadas número externo
Notes:
For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
Tipo de desvío 
inmediatamente: "call forwarding (unconditional)" function for the external numberSelection of the system telephony account
comunicando: "call forwarding (on busy)" function the external number
no contesta: call forwarding (if not responding)" function for the external number
decide each time a key is pressed
 
Configuración desvío de llamadas 
configuración actual: Call forwarding for external numbers is switched on or off or switched over only in the current configuration
configuración permanente: Call forwarding for external numbers is switched on or off or switched over in the permanent configuration
decide each time a key is pressed
 
Cuenta 
Selection of the system telephony account
 
Número a desviar 
Enter the external number of the PBX (without the exchange line access number and without the area code
 
Destino de desvío 
Enter destination number
Important: If the automatic exchange line request is disabled, the forwarding destination must always be entered with exchange line access number. If the automatic exchange line request number is enabled, the exchange line access number must always be entered without exchange line access number.

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V03 12/2020