Settings > Display > Settings Telephone Display
Settings Telephone Display
Proceed as folllows:
•
Using the telephone (page   > Ajustes > Dispositivo > Pantalla > (Más))
Display
Brillo (COMfortel 3600 IP)
 The display brightness will be set automatically.
  The automatic display brightness is disabled and the display brightness must be set manually.
Brillo (COMfortel 1400 IP und 2600 IP)
  By moving the regulator, the display brightness can be set.
Imagen de fondo
Live wallpapers are animated wallpapers that can be used instead of conventional wallpapers. You can download live wallpapers via apps or import them via data storage device. Alternatively, you can use a configured IP camera as live wallpaper. A remote wallpaper can be imported from a server into the phone by entering the URL.
Select the display wallpaper
: Select a wallpaper from the Galería.
: Select an image from the Fondos de pantalla.
: Select an image from the Fondos animados.
•
Select a live wallpaper that was saved onto the phone via app or storage medium.
•
: Select a live wallpaper from a configured IP camera.
•
: Select the Fondo de pantalla remoto by entering the remote wallpaper URL (Fondos animados > Fondo de pantalla remoto > Ajustes...)
Follow the instuctions below to provision a Remote Wallpaper:
•
The image file must not exceed 256 kB.
•
The following section must be added to the provisioning file:
<wallpaper>
<url>http://myserver.de/my/path/imagename.jpg</url>
</wallpaper>
•
For each phone type, own wall papers can be applied. To do this, the additional tag <HWTYP> must be used.
Note: Within the *.xml file, the two characters „<“ and „>“ must be replaced by „&lt;“ or. „&gt;“ (<url>http://myserver.de/my/path/imagename&lt;HWTYP&gt;.jpg></url>).
The tag will subsequently be replaced depending on the phone type CF1400IP, CF2600 IP or CF3600IP).
URL example for COMfortel 3600 IP: http://myserver.de/my/path/imagenameCF3600IP.jpg.
 
Modo de suspensión 
The selected time indicates after how many seconds/minutes without action the telephone switches into the idle state. Then, the display no longer reacts on touch. If No automático is selected, the telephone will not automatically be set into the idle state.
 
Sleep mode off
Requirements:
•
If a screen lock is configured: Knowlegde of the screen lock password
Notes: The idle state is switched off automatically if, for example, an incoming call is signalled, or if the alarm rings. If the screen lock is set, the idle state is enabled again immediately after the event.
 
Press any key on the telephone (exception: function keys) and if necessary enter the screen lock password.
Salvapantallas 
Select the screen candy (e. g. clock or colours). For some screen candys, additional settings can be made under .
 
  Tamaño de fuente
Select the font size (from small to huge).
 
More
Perfil de pantalla   (only COMfortel 1400 IP)
Select the display profile. The display profile can be configured to customise the viewing angle of the display to make it easier to read if the device is being used on a table or mounted on a wall.
 
  Apagar la pantalla
 Display will be switched off in power save mode.
 Display will be dimmed in power save modede.
Proximity sensor  (only COMfortel 3600 IP)
The farther the regulator is set to the right, the higher is the sensitivity of the sensors. From which distance the proximity sensor start reacting can be seen when the star changes the colour.
Configuration-dependent idle state
ID de configuración 
The telephone changes into the idle state if the PBX switches over into a specific configuration (e. g. night configuration).
Requirements:
•
Configured configuration in the PBX (see Advanced Information of the PBX)
•
Enabled Configuration switchover check box in the PBX
Enter the configuration ID of the configuration.
Note: To switch off the configuration-dependent idle state, delete the configuration ID in the ID de configuración entry filed and click OK.
 
 
  LED de mensajes
Parpadeo y luz fija Indicates new entries, or entries that have already been viewed.
Solo parpadeo Indicates new entries.
desactivar LED is always switched off.
  Señalización de buzones de fax
If you find the LED signals of the fax boxes disruptive or annoying, they can be switched off separately.
 New fax entries will be signalled.
  LED de pantalla (only COMfortel 1400 IP and 3600 IP)
The different telephone states can be set (e. g. missed calls, new messages, etc.). Configure which telephone state is to be signalled or if the signalling shall be switched off completely.
Mostrar llamadas y conversaciones Indicates the status of the call.
Mostrar llamadas, conversaciones y uso de auriculares Indicates the status of the call and the headset activation (only COMfortel 3600 IP).
Show alerting, calls and new messages: Indicates the status of the call and new messages.
desactivar LED is always switched off.
 
  Estado de registro del interlocutor VoIP
 If not registered on the PBX, the speed dialling key signals unregistered VoIP subscribers in yellow.
 No signalling of the registration status.
Calibración táctil (only COMfortel 1400 IP and 2600 IP)
If the telephone reacts imprecise, it must be calibrated by touching the two crosses on the display.
Comportamiento del modo de ahorro de energía 
The selected time indicates after how many minutes in the idle state the power save mode will be switched on. The background lighting will then be dimmed or switched off completely and the LEDs are inactive (exception: message LED for missed calls).
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V04 03/2024