Contacts and Phone Number Lists > LDAP Client > Adding New Account
Adding New Account
To create a new account, you must make the following settings:
•
Name
•
Host
•
Port
•
User name
•
Password
•
BaseDN
•
Protocol
Proceed as follows:
•
Using the telephone
Furthermore, you can make the following settings:
•
Contact filter
•
Phone filter
•
Use ordering rules
 
1.
Tap on > Paramètres.
2.
Under Comptes tap on Ajouter un compte.
3.
Under Ajouter un compte tap on LDAP.
4.
Tap on Nom and enter a name for the account.
5.
Tap on Hôte and enter the IP address of the PBX.
6.
Tap on Port and enter a port.
Note: On the PBX, it is recommended to use the default port 389.
7.
Tap on Nom d’utilisateur and enter the user name.
Note: The user name can be found in the Configuration Manager of the PBX under User data > Address Books > Paramètres in the line Simplified user name next to Nom d’utilisateur (e.g.: cn=auerswaldschandelah,dc=auerswald).
8.
Tap on Mot de passe and enter a password.
Note: The password can be found in the Configuration Manager of the PBX under User data > Address books > Paramètres in the line Simplified user name next to Mot de passe.
9.
Tap on BaseDN and enter the BaseDN.
Note: The BaseDN can be found in the Configuration Manager of the PBX under User data > Address books > Paramètres in the line Simplified user name. next to BaseDN.
10.
Tap on Protocole and enter the protocol that is used in the PBX.
Note: On PBXs, protocol 3 is always used.
11.
Tap on Tester puis enregistrer la connexion.
Note: The exported contact groups can be found under Applis > Contacts.
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V03 12/2020