Functions > Call Forwarding > Function Key for Call Forwarding for Subscribers
Function Key for Call Forwarding for Subscribers
Press the key assigned to Transfert d’appel correspondant (cor.) to switch call forwarding for subscribers for the configured destination on or off, or toggle, in the telephone.
Press a single key assigned to Désactiver les transferts d’appel cor. (tous) to switches off all currently enabled call forwardings for the subscriber.
In addition, when functions are assigned on the first key level, the status of the function is indicated by the corresponding LED.
 
LED signalling on the key (not applicable if assigned with "Call fwd. (scr.), deactivate all":
red
Subscriber call forwarding is enabled for the configured destination.
yellow
Subscriber call forwarding is enabled for a different destination.
off
Subscriber call forwarding is disabled.
Requirements for using the function:
•
for internal destination numbers: Telephone must be connected to a PBX.
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting Transfert d’appel correspondant (cor.)
•
Using the telephone by selecting Transfert d’appel correspondant (cor.)
Notes:
For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
Type de transfert 
immédiat: "call forwarding (unconditional)" function for the subscriber
si occupé: "call forwarding (on busy)" function for the subscriber
si non-réponse: "call forwarding (if not responding)" function for the subscriber
Compte 
Select the account.
Destination du transfert 
Enter destination number
Important: Enter phone numbers exactly as when dialling, for example, always enter external numbers with a leading exchange line access number.
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V04 03/2024