Settings > Display > Settings Telephone Display
Settings Telephone Display
Proceed as folllows:
•
Using the telephone (page   > Impostazioni > Dispositivo > Schermo > (Altro))
Display
Luminosità (COMfortel 3600 IP)
 The display brightness will be set automatically.
  The automatic display brightness is disabled and the display brightness must be set manually.
Luminosità (COMfortel 1400 IP und 2600 IP)
  By moving the regulator, the display brightness can be set.
Sfondo
Live wallpapers are animated wallpapers that can be used instead of conventional wallpapers. You can download live wallpapers via apps or import them via data storage device. Alternatively, you can use a configured IP camera as live wallpaper. A remote wallpaper can be imported from a server into the phone by entering the URL.
Select the display wallpaper
: Select a wallpaper from the Galleria.
: Select an image from the Sfondi.
: Select an image from the Sfondi animati.
•
Select a live wallpaper that was saved onto the phone via app or storage medium.
•
: Select a live wallpaper from a configured IP camera.
•
: Select the Sfondo remoto by entering the remote wallpaper URL (Sfondi animati > Sfondo remoto > Impostazioni...)
Follow the instuctions below to provision a Remote Wallpaper:
•
The image file must not exceed 256 kB.
•
The following section must be added to the provisioning file:
<wallpaper>
<url>http://myserver.de/my/path/imagename.jpg</url>
</wallpaper>
•
For each phone type, own wall papers can be applied. To do this, the additional tag <HWTYP> must be used.
Note: Within the *.xml file, the two characters „<“ and „>“ must be replaced by „&lt;“ or. „&gt;“ (<url>http://myserver.de/my/path/imagename&lt;HWTYP&gt;.jpg></url>).
The tag will subsequently be replaced depending on the phone type CF1400IP, CF2600 IP or CF3600IP).
URL example for COMfortel 3600 IP: http://myserver.de/my/path/imagenameCF3600IP.jpg.
 
Stand-by 
The selected time indicates after how many seconds/minutes without action the telephone switches into the idle state. Then, the display no longer reacts on touch. If Nessun automatismo is selected, the telephone will not automatically be set into the idle state.
 
Sleep mode off
Requirements:
•
If a screen lock is configured: Knowlegde of the screen lock password
Notes: The idle state is switched off automatically if, for example, an incoming call is signalled, or if the alarm rings. If the screen lock is set, the idle state is enabled again immediately after the event.
 
Press any key on the telephone (exception: function keys) and if necessary enter the screen lock password.
Daydream 
Select the screen candy (e. g. clock or colours). For some screen candys, additional settings can be made under .
 
  Dimensione caratteri
Select the font size (from small to huge).
 
More
Profilo schermo   (only COMfortel 1400 IP)
Select the display profile. The display profile can be configured to customise the viewing angle of the display to make it easier to read if the device is being used on a table or mounted on a wall.
 
  Spegni schermo
 Display will be switched off in power save mode.
 Display will be dimmed in power save modede.
Proximity sensor  (only COMfortel 3600 IP)
The farther the regulator is set to the right, the higher is the sensitivity of the sensors. From which distance the proximity sensor start reacting can be seen when the star changes the colour.
Configuration-dependent idle state
ID configurazione 
The telephone changes into the idle state if the PBX switches over into a specific configuration (e. g. night configuration).
Requirements:
•
Configured configuration in the PBX (see Advanced Information of the PBX)
•
Enabled Configuration switchover check box in the PBX
Enter the configuration ID of the configuration.
Note: To switch off the configuration-dependent idle state, delete the configuration ID in the ID configurazione entry filed and click OK.
 
 
  LED messaggi
Lampeggiamento e luce fissa Indicates new entries, or entries that have already been viewed.
Solo lampeggiamento Indicates new entries.
disattiva LED is always switched off.
  Segnalazione caselle fax
If you find the LED signals of the fax boxes disruptive or annoying, they can be switched off separately.
 New fax entries will be signalled.
  LED schermo (only COMfortel 1400 IP and 3600 IP)
The different telephone states can be set (e. g. missed calls, new messages, etc.). Configure which telephone state is to be signalled or if the signalling shall be switched off completely.
Mostra chiamate e conversazioni Indicates the status of the call.
Mostra chiamate, conversazioni e funzionamento ricevitore Indicates the status of the call and the headset activation (only COMfortel 3600 IP).
Show alerting, calls and new messages: Indicates the status of the call and new messages.
disattiva LED is always switched off.
 
  Stato di registrazione dei partecipanti VoIP
 If not registered on the PBX, the speed dialling key signals unregistered VoIP subscribers in yellow.
 No signalling of the registration status.
Calibrazione touch (only COMfortel 1400 IP and 2600 IP)
If the telephone reacts imprecise, it must be calibrated by touching the two crosses on the display.
Comportamento della modalità risparmio energetico 
The selected time indicates after how many minutes in the idle state the power save mode will be switched on. The background lighting will then be dimmed or switched off completely and the LEDs are inactive (exception: message LED for missed calls).
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V04 03/2024