Functions > Relays (System Telephone) > Function Key for Switching Relays
Function Key for Switching Relays
Press the key to switch the configured relay on or off or to toggle.
In addition, when functions are defined on the first key level, the status of the relay is indicated by the corresponding LED.
 
LED signalling on the key:
green
The relay configured on the key is enabled.
off
The relay configured on the key is disabled.
 
Requirements for using the function:
•
Telephone is system telephone on the PBX
•
Switching of relay permission granted in the PBX
 
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting Relè
•
Using the telephone by selecting Relè
Notes:
For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
Operazione 
decide each time a key is pressed
 
Account 
Select the system telephony account
 
ID relè 
Enter the identification number. You find it in the PBX (Device > Relays (Actuators)).
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V04 03/2024