Function Keys

The telephones provide 10 (COMfortel 1400 IP) or 15 (COMfortel 2600/3600 IP) programmable function keys with LED. This keys can each be defined with two functions (on two levels). In addition, touch function keys can be created on the display and can each be defined with one function.

Up to three COMfortel Xtension300 key extension modules (not included in the scope of delivery) can be attached to the COMfortel 2600/3600 IP to add programmable function keys. The modules are mounted on the right-hand side of the telephone. On each module 30 programmable function keys with LED are available.

Proceed as follows:

•

Using the Configuration Manager

•

Using the telephone

Using the Configuration Manager to Configure a Function Key

Open the page

> Functietoetsen.

Only COMfortel 2600/3600 IP: In the Toetskeuze list field, select the key extension module whose keys you want to define.

Note: Only COMfortel 2600/3600 IP: Keys 16 to 105 are not available until you connect COMfortel Xtension300 key extension modules (not included in the scope of delivery) to the telephone.

Via the tabs you can configure the key level of the function key (first or second key level), or if you want to configure a touch function key.

Note: Not every function supports the configuration of a touch function key.

In the list field next to the function key to be defined, select the function.

Note: To change the settings for a function key that already has a function assigned to it, click that key.

The current settings for the key assignment are shown in the display.

In the Beschrijving entry field, enter a description for the key.

Note: The key description is used for printing the label and for the displaying in the telephone.

In the Operation list field, select one of the following options, if available for the function in question:

omschakelen: Press the key to switch the function on or off.

inschakelen: Enables the function.

uitschakelen: Disables the function.

In the Autorisatieniveau list field, select one of the following options, if available for the function in question:

Gebruiker: The function key can be changed by users, sub-administrators and administrators.

Sub-administrator: The function key can only be changed by sub-administrators and administrators.

Administrator: The function key can only be changed by administrators.

Note: Possible further settings are described in the chapter of the corresponding function.

Using the Telephone to Configure a Function Key

Tap on

> Functietoetsen.

Press the function key you want to define.

The LEDs of the function keys that are already assigned on one level light up yellow. If a function key is assigned on both levels, the LED is red.

Note: Only COMfortel 2600/3600 IP: Keys 16 to 105 are not available until you connect COMfortel Xtension300 key extension modules (not included in the scope of delivery) to the telephone.

Tap on the function.

In the Operation list field, select one of the following options, if available for the function in question:

omschakelen: Press the key to switch the function on or off.

inschakelen: Enables the function.

uitschakelen: Disables the function.

If available for the function in question, you can,next to entering the number or subscriber, also select one by tapping on

Tap on Toekennen.

Tap on Beëindigen.

Note: Possible further settings are described in the chapter of the corresponding function.