Functions > Call Forwarding > Function Key for Call Forwarding for Subscribers
Function Key for Call Forwarding for Subscribers
Press the key assigned to Doorschakeling deelnemer (Dn) to switch call forwarding for subscribers for the configured destination on or off, or toggle, in the telephone.
Press a single key assigned to Doorschakeling Dn uitschakelen (alle) to switches off all currently enabled call forwardings for the subscriber.
In addition, when functions are assigned on the first key level, the status of the function is indicated by the corresponding LED.
 
LED signalling on the key (not applicable if assigned with "Call fwd. (scr.), deactivate all":
red
Subscriber call forwarding is enabled for the configured destination.
yellow
Subscriber call forwarding is enabled for a different destination.
off
Subscriber call forwarding is disabled.
Requirements for using the function:
•
for internal destination numbers: Telephone must be connected to a PBX.
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting Doorschakeling deelnemer (Dn)
•
Using the telephone by selecting Doorschakeling deelnemer (Dn)
Notes:
For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
Doorschakeltype 
direct: "call forwarding (unconditional)" function for the subscriber
bij bezet: "call forwarding (on busy)" function for the subscriber
bij niet melden: "call forwarding (if not responding)" function for the subscriber
Account 
Select the account.
Doorschakeldoel 
Enter destination number
Important: Enter phone numbers exactly as when dialling, for example, always enter external numbers with a leading exchange line access number.
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V04 03/2024