Functions > Waiting Field Function (System Telephone) > Function Keys for a Shared Line

Function Keys for a Shared Line
Press the Shared Line key that has been assigned to place a caller (indicated by the key) into the waiting field. Press the same key to establish a connection with the caller from the waiting field. Pressing the key depends on the current status as displayed by the LED next to the key.
 
 
Notes:
If you press the key to place a caller in the waiting field, the LED next to the key lights up yellow. If a caller is placed in the waiting field either automatically or by another waiting field reception, the LED then lights up red.The function can only be set up on a programmable function key that has an LED (not on a touch function key).
The Shared Line function fills both key levels. If one level is filled, the other levels are also filled automatically.
 
 
Requirements for using the function:
 
Proceed as follows by assigning the function key:
Notes:
The function can only be set up on a programmable function key that has an LED (not on a touch function key).
For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
Account 
Selection of the account
 
URL of shared line 
For PBX account: internal number
For SIP account: account phone number
Important: You cannot assign calls via the DDI for SIP trunking accounts and ISDN PTP connections. Do not enter a value in the URL of shared line entry field. The calls are assigned via the account.

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V08 12/2020