Access data
Enable
Enable the use of LDAP contacts.
Authentication type
Specifies how LDAP contacts can be accessed.
Note: Auerswald/FONtevo PBXs currently only support the option Simple.Use TLS
The TLS certificate is used for secure data transfer.
Ignore TLS certificate
Disables the request for a TLS certificate.
Data is still encrypted before transfer. However, no TLS certificates are requested.
HOST
IP address of the LDAP server used here. This is usually the PBX's IP address.
User name
Name for logging in to the LDAP server on the PBX. It contains your phone number:telephoneNumber=user phone number, dc=auerswald.
You will find your phone number on the PBX as follows:
•COMtrexx: User > Phone numbers
•COMmander/COMpact:Subscriber (scr.) > Phone numbers
If contact groups have been created on the PBX and one needs to be transferred into the softphone, the User name then contains the name of the relevant contact group.
You will find the contact group name on the PBX as follows:
•COMtrexx: User data > Contacts and assignment > Settings
•COMmander/COMpact:User data > Address Books > Settings
Password
Password for logging in to the LDAP Server on the PBX.
You will find the password on the PBX as follows:
•COMtrexx: User > Phone numbers > Configure > Basic Settings
•COMmander/COMpact:Subscriber (scr.) > Configure > Basic Settings > LDAP passwords for subscriber-specific LDAP requets
You will find the password for contact groups on the PBX as follows:
•COMtrexx: User data > Contacts and assignment > Settings
•COMmander/COMpact:User data > Address Books > Settings
DC
LDAP server domain components.
Note: The setting for Auerswald/FONtevo PBXs is always dc=auerswald. Do not change it.Limit the number of search results to
Specifies the maximum number of search results to be displayed.
Note: The maximum number of search results to be displayed is restricted to 50 on the PBX. If the number of search results exceeds that maximum value, the last entries are not displayed. Restrict the search if that happens.Use this account for outgoing calls
Specifies the account used for outgoing calls.
Use this account for presence
Note: The presence status can be selected, but it currently cannot be output at the destination.