Présentation du numéro de téléphone
Important: The expert settings for the ISDN connection are settings that should only be changed if e. g. country or provider-specific particularities make it absolutely necessary.Proceed as follows:
•Separately for PBX base number
•Using the Configuration Manager (page Réseaux publics > RNIS > Numéro Principal d’abonnement/Faisceau (NDI) > Configurer)
Requirements:
•Configured PBX base number
OUTGOING CALLS (CDPN)
CDPN of type
CDPN in format
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
CDPN receives prefix
Enter a prefix (*, #, 0-9; max. 4 digits) to send possibly necessary control commands to the provider.
CDPN receives postfix
Enter a postfix (*, #, 0-9; max. 4 digits) to send possibly necessary control commands to the provider.
CLIR
The selection of the available options for this function is provider-specific.
Infoélément
The called party number is sent as info element.
Préfixe de composition
The called party number is sent as keypad sequence. The dial prefix is provider-specific (e. g. #31).
OUTGOING CALLS (CGPN)
Propre numéro de téléphone de type
Propre numéro de téléphone au format
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
Signaler les types d’appel LLC comme
Audio 3 kHz
Selection for fax devices and analogue modems (e. g. alarm systems and emergency devices).
Voix
The exchange line compresses the channel. The transferred amout of data is reduced, whereby the sound quality on the receive side could be slightly changed.
Identique au abonné
The LLC call type is adopted from the subscriber.
automatique
Audio 3kHz is preferably used. At problems with the destination, it is automatically switched to Speech.
Identité en départ
The called party sees a customer-defined phone number instead of a phone number assgined by the network provider. The customer-defined number is not checked by the exchange line for correctness.
CLIP no screening from type
Identité en départ au format
Requirements:
•Enabled Identité en départ for incmong calls
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
CONNECTED CALLS (COPN)
Connected phone number of type
Numéro de téléphone associé au format
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
Codage spécial du numéro de téléphone associé
Par défaut
Must be selected in all countries except for Spain.
Espagne
Must be selected in Spain.
Note: Depending on the provider, in Spain the special encoding Par défaut might as well be selected.FOR INCOMING CALLS
Waiting for direct dialling (4..8 sec)
Note: This is a country-specific setting (only relevant in Austria).Enter a waiting time until the direct dialling (between 4 and 8 seconds). This is useful when the phone number is first transferred incompletely.