Buch1 > Using the Configuration Manager > Calendriers > Configurations > Management Configuration
Management Configuration
Proceed as follows:
•Using the Configuration Manager
Commutation de configuration automatique
Requirements:
•Minimum of two configured configurations and configured switching times
•Current PBX time
Time-controlled configurations are toggled according to the PBX internal clock.
*Note: If automatic configuration switchover is enabled, the configuration enabled under Time control > Switching times for the current time becomes active. If a different configuration is then switched manually, this remains active until the next switching time.
Controllable with system relay: Aut.Konfig.um. (900)
Requirements:
•Automatic configuration switchover is enabled
Automatic configuration switchover is controllable via phone.
Nom de configuration
Freely selectable name. This name is used to identify the configuration within the PBX.
Numéro d’identification
Automatically issued number. Is used for manual switching of a configuration by a programming sequence.
*Note: All previously assigned identification numbers can be viewed sorted by number, name or type under Synthèses > Plan de répartition des numéros d’identification.
activer
The selected configuration is switched on.
*Note: To switch off a configuration, switch on a different configuration.
Nouveau
Adds a new configuration to the list. The settings made for the existing configuration are copied. You must then make the individual settings for the configuration.
Supprimer
Deletes the entries marked in the list.
Copier
Configuration settings are copied from one configuration into other, selected configurations.