Buch1 > Using the Configuration Manager > Périphériques > Relais (actionneurs) > Settings of the Relays (Actuators) > 2TSM Module
2TSM Module
Proceed as follows:
•Using the Configuration Manager (page Périphériques > Relais (actionneurs) > Configurer)
Configuration du relais
Select the relay.
Plages horaires
Specifies after how many seconds the PBX will switch off the relay. Possible entries: 0 bis 6000 (0 only for manual relays).
*Note: The switching duration is used for relays with the operating modes Light, Door opener, Alarm, PC relay and Manual relay.
*Note: To enable the PBX to switch off the relay after the specified switching duration, off control must be supported by the relay and be switched on (for some relays, e. g. the a/b Switching Modules, switching off cannot be controlled). Alternatively, the hold time of the relay can be used.