Buch1 > Using the Configuration Manager > Administration > Mise à jour et redémarrage du firmware > Management of the Firmware Updates > Store the firmware in the PBX (manual firmware update)
Store the firmware in the PBX (manual firmware update)
Proceed as follows:
•Using the Configuration Manager (Administration > Mise à jour et redémarrage du firmware)
•To restore firmware, to restart and (only COMmander 6000/R/RX) to power down the PBX: By clicking a button on the PBX
Start firmware update
Requirements:
•A firmware file (*.rom) saved on a data storage device (PC)
*Note: You can find a new firmware file on the Internet (see Auerswald Service Portal). Alternatively, you can get a new firmware file from your specialised dealer.
A firmware file (*.rom) is saved in the PBX via the Configuration Manager and the firmware is enabled after a reboot.
Redémarrage automatique
Automatically restarts the PBX and activates the firmware after clicking on Importation. The steps Initiate reboot will be skipped.
Initiate reboot
Restarts the PBX and enables the firmware.
Select and import a firmware file (*.rom) that is stored on a (PC) data storage device.