Phone Numbers for PTP Connection
Proceed as follows:
Separately for VoIP accounts
Using the Configuration Manager (Réseaux publics > VoIP > Comptes > Configurer)
*Note: You will receive the settings data from the VoIP provider with whom you have set up the account.
Compte
Select the account to be displayed/configured.
Numéro de téléphone du système
Bloc d’appel direct|De à
Requirements:
prefixes (country and local area code) configured for the VoIP account
A PTP connection has a PBX base number (base number, header, base phone number) and (Direct Dial In - DDI) extension numbers. The VoIP provider assigns the phone numbers for the connection. The phone number to be dialled is formed from the PBX base number + (DDI) extension number.
*Note: You can enter a zero both as a single number (e.g. 0 to 99, as is usually the case) and as a digit in the set number of places in extension numbers (e.g. 00 to 99).
*Note: If linear call distribution for the PTP connection is enabled (Réseaux publics > Acheminement des appels) and if the internal numbers match the external extension numbers, the system automatically performs a 1:1 assignment for the extension numbers in the extensions block. If an extension cannot be assigned, the fallback call distribution function is enabled.
*Note: If you want an extension number to be different from the ones used in linear call distribution, or if an extension number is needed for a different function (e.g. remote configuration, CLIP no screening), you must also enter it in the phone number list, (select Nouvelle).
*Note: For example, for extensions block 00 to 99: enter extension 0 as an extension and assign it in the call distribution.
*Note: For example, for extensions block 00 to 99: enter the individual extension numbers 00 to 09 as an extension number and assign them during call distribution.
*Note: You must enter all the extension numbers for a PTP connection that is not running linear call distribution.
Sonnerie pour connexion PTP susmentionné
The ringtone specifies which sequence of sounds is used to signal external calls to the phone numbers of the PTP connection to internal subscribers on the PBX.
*Note: Individual ringtones can be assigned to extension numbers that were input in different ways.
*Note: See Ringer tones for information about exceptions to signalling and sound sequences.
Identité en départ
Requirements:
CLIP no screening service feature supported and enabled by the network provider
Type of number presentation configured for the VoIP provider In accordance with RFC 3325 with P-Asserted-Identity or In accordance with RFC 3325 with P-Preferred-Identity
The exchange line transfers the customer-specific phone number (e.g. a service phone number) entered in Phone number for CLIP no screening to the call destination without checking that this number is correct.
*Note: In Germany, some providers only offer this service feature for PTP connections. The CLIP no screening function for VoIP connections also depends on which provider is being used.
*Note: When an emergency number is dialled, the phone number received from the network provider is always transmitted, not the phone number you specified yourself.
*Note: However, the correct phone number is also still transferred to the exchange line, but this cannot be viewed by the person being called.
*Note: CLIP no screening must be enabled for every connection to ensure that the phone number for CLIP no screening is transmitted instead of the phone number received from the network provider.
Extension (DDI)
If you want an extension number to be different from the ones used in linear call distribution, or if an extension number is needed for a different function (e.g. remote configuration, CLIP no screening), you must also enter it in the phone number list, (select Nouvelle). You must enter all the extension numbers for a PTP connection that is not running linear call distribution.
*Note: You can input up to 250 external numbers for land line and VoIP connections in the PBX. In other words, the total maximum number of MSNs, DDI numbers and additional numbers is 250.
Phone number for CLIP no screening
Requirements:
set up phone number
CLIP no screening switched on for the VoIP account
Customer-specific phone number (e.g. a service phone number) that is transferred to the destination by the exchange line without its correctness being checked.
*Note: The phone number must always be configured completely, thus, with the local area code or e. g. as 0800....
Nom d’affichage
This name is used for display purposes on the system phone.
*Note: If no display name has been entered, the account name is displayed.
*Note: If your provider (in Germany) is T-Online, you must also enter the VoIP phone number you received from them under Nom d’affichage.
Sonnerie
The ringtone specifies which sequence of sounds is used to signal external calls to internal subscribers on the PBX.
*Note: See Ringer tones for information about exceptions to signalling and sound sequences.
Nouvelle
Adds a new phone number.
Supprimer
Deletes the entries marked in the list.