Management Subscriber

Buch1 > Using the Configuration Manager > Subscriber (scr.) > Phone numbers > Management Subscriber

Proceed as follows:

•Using the Configuration Manager (Subscriber (scr.) > Phone numbers)

Phone Number

This (exchange line access number) is an internal number. You can select any of the numbers in the internal supply of phone numbers. This number is then used for distributing calls and can be called directly by another internal subscriber.

Note: Double allocation of a number is not possible.

Note: Using numbers with few digits (two or three-digit numbers) inevitably restricts the possible supply of numbers requiring more digits. For example, if the number 12 is assigned, the numbers 120-129 and 1200-1299 will no longer be available.

Note: The default exchange line access number on the PBX is 0 in the factory settings. However, this can be changed. Note that changing the exchange line access number restricts the dial plan.

Note: The internal number entered here needs to be entered in the ISDN device or in the system phone as the (first) MSN. Also on an ISDN device, make sure that the phone number is transmitted to the PBX.

Name

Freely selectable name. This name is used to identify the subscriber within the PBX and the connected system phones. The name can also be transferred to the VoIP end devices via LDAP server.

Module | Port

Module and port to which the end device (e. g. phone) is connected.

Device type

Device type depending on the end device connected.

Analogue end devices
Answering machine	analogue answering machine
Fax machine	analogue fax machine
Phone	analogue phone, analogue modem
Door terminal	analogue door terminal, selection deletes the subscriber and opens Devices > Device wizard for configuration of a door terminal
Announcement output	analogue announcement output, selection deletes the subscriber and opens Devices > Device wizard for configuration of an announcement output

ISDN end devices
DECT system phone	Handset on a COMfortel DECT 900 Base
Fax machine	ISDN fax machine in compliance with the Euro ISDN Standard (DSS1)
ISDN PC contr.	ISDN PC controller in compliance with the Euro ISDN Standard (DSS1)
ISDN system phone	System phone COMfortel 1100/1200/1400/1500/1600/2500/2500 AB/2600
ISDN phone	ISDN phone in compliance with the Euro ISDN Standard (DSS1)

VoIP end devices
COMfortel 1200 IP	COMfortel 1200 IP
COMfortel C-400	Conference phone COMfortel C-400
COMfortel IP	COMfortel 1400 IP, COMfortel 2600 IP, COMfortel 3200, COMfortel 3500, COMfortel 3600 IP
COMfortel IP1040 Handset	Handset (e.g. COMfortel DECT 900C) on a COMfortel DECT IP1040 Base
COMfortel VoIP 2500 AB	COMfortel VoIP 2500 AB
COMfortel WS-500X Handset	Handset (e.g. COMfortel M-510/520/530/710/720/730) on a COMfortel WS-500S or WS-500M
COMfortel WS-IP Handset	Handset (e.g. COMfortel M-100/200/210/300/310) on a COMfortel WS-400 IP or COMfortel WS-650 IP
Standard VoIP phone	Standard VoIP end device (SIP) from another manufacturer, soft phone (SIP)

Property | Configure

Opens the configuration of the subscriber.

Further help under Settings of the Subscriber Properties

Filter:

The list of subscribers is filtered according to the entered or selected value for Phone number, Name or Module.

New

Adds a new subscriber. Then make the settings for the subscriber.

Further help under Add Subscriber

Delete

Deletes the entries marked in the list.

Note: If a handset of the device type COMfortel WS-500X Handset is deleted as a subscriber, this is also removed in the base station in which it was configured.