Management Subscriber
Proceed as follows:
•Using the Configuration Manager: Abonnés (Abo) > Numéros de téléphone
Numéro de téléphone
This (exchange line access number) is an internal number. You can select any of the numbers in the internal supply of phone numbers. This number is then used for distributing calls and can be called directly by another internal subscriber.
Note: Double allocation of a number is not possible.
Note: Using numbers with few digits (two or three-digit numbers) inevitably restricts the possible supply of numbers requiring more digits. For example, if the number 12 is assigned, the numbers 120-129 and 1200-1299 will no longer be available.
Note: The default exchange line access number on the PBX is 0 in the factory settings. However, this can be changed. Note that changing the exchange line access number restricts the dial plan.
Note: The internal number entered here needs to be entered in the ISDN device or in the system phone as the (first) MSN. Also on an ISDN device, make sure that the phone number is transmitted to the PBX.
Nom
Freely selectable name. This name is used to identify the subscriber within the PBX and the connected system phones. The name can also be transferred to the VoIP end devices via LDAP server.
Module | Port
Module and port to which the end device (e. g. phone) is connected.
Type de périphérique
Device type depending on the end device connected.
Analogue end devices |
---|
Répondeur | analogue answering machine |
Fax | analogue fax machine |
Téléphone | analogue phone, analogue modem |
Interphone | analogue door terminal, selection deletes the subscriber and opens Périphériques > Assistant de périphériques for configuration of a door terminal |
Interface de paging | analogue announcement output, selection deletes the subscriber and opens Périphériques > Assistant de périphériques for configuration of an announcement output |
ISDN end devices |
---|
Téléphone dédié DECT | Handset on a COMfortel DECT 900 Base |
Fax | ISDN fax machine in compliance with the Euro ISDN Standard (DSS1) |
Carte PC RNIS | ISDN PC controller in compliance with the Euro ISDN Standard (DSS1) |
Téléphone dédié RNIS | System phone COMfortel 1100/1200/1400/1500/1600/2500/2500 AB/2600 |
Téléphone RNIS | ISDN phone in compliance with the Euro ISDN Standard (DSS1) |
VoIP end devices |
---|
COMfortel 1200 IP | COMfortel 1200 IP |
COMfortel C-400 | Conference phone COMfortel C-400 |
COMfortel IP | COMfortel 1400 IP, COMfortel 2600 IP, COMfortel 3200, COMfortel 3500, COMfortel 3600 IP |
COMfortel IP1040 Handset | Handset (e.g. COMfortel DECT 900C) on a COMfortel DECT IP1040 Base |
VoIP COMfortel 2500 AB | COMfortel VoIP 2500 AB |
COMfortel WS-500X Handset | Handset (e.g. COMfortel M-510/520/530/710/720/730) on a COMfortel WS-500S or WS-500M |
COMfortel WS-IP Handset | Handset (e.g. COMfortel M-100/200/210/300/310) on a COMfortel WS-400 IP or COMfortel WS-650 IP |
Téléphone VoIP par défaut | Standard VoIP end device (SIP) from another manufacturer, soft phone (SIP) |
Propriété | Configurer
Opens the configuration of the subscriber.
Filtres
The list of subscribers is filtered according to the entered or selected value for Numéro de téléphone, Nom or Module.
Adds a new subscriber. Then make the settings for the subscriber.
Deletes the entries marked in the list.
Note: If a handset of the device type
COMfortel WS-500X Handset is deleted as a subscriber, this is also removed in the base station in which it was configured.