Configuring VoIP Door Terminal
Proceed as follows:
• Using the Configuration Manager (page Devices > Device wizard > Configure)
SIP Password
Enter the SIP password required by the connected device.
IP configuration
IP address
Enter the IP address required by the connected device. Possible entries: IP address with a range of 0 to 255 (example: 192.168.0.240).
Port
Enter the port required by the connected device. Possible entries: 1 to 65535.
User name
Enter the user name (authentication data to control the relays).
Password
Enter the password (authentication data to control the relays).
Relay X, Switch input X
Name
Enter the names of the relays and switch inputs.
Destination number
Select or enter the required call destination (external number, short-code number, internal number of the individual phone, internal number of the group).
Note: The call destination is first entered identically for all configurations. It can be changed later. Note: If a door call should also be executed via VoIP accounts or GSM gateways, in any case the external number must be entered with the corresponding city code, even if it is the local prefix. Note: To create further configurations for a door terminal, open the page Devices > Door terminals and click Configure in the line of the corresponding door terminal.SIP invite
Enter the SIP invites which the connected door terminal uses as signal. (Possible entries: Digits and the characters * and #).
Note: If default values have already been entered in the device template, the entry fields will not be displayed. If you want to change these values, click Expert.