Buch1 > Using the Configuration Manager > Devices > Action URLs > Management of the Action URLs (HTTP Request) > Event type
Event type
Proceed as follows:
• Using the Configuration Manager ( Devices > Action URLs page)
* You can find further information about the structure of an Action URL, the switching of relays, the triggering of an alarm etc. in the Auerswald DokuWiki.
 New
Adds a new Action URL. You must then make the settings for this new Action URL.
 Delete
Deletes the entries that are marked in the list.
Alarm
In the first list feld, select one of the existing alarms, select the alarm type in the second list field and click .
If you do not want to use any of the existing alarms, select New alarm in the list field ( cancels the operation). Enter the phone number of the alarm and a freely selectable name. In the list field Alarm type, select the alarm type. Click Ok.
* Note: You can successively select all three alarm types for one Action URL.
Phone number
This is an internal number. You can select any of the numbers in the internal supply of phone numbers. This number can be called directly by an internal subscriber to initiate an alarm. (Select   New to enter.)
* Note: A number cannot be allocated twice.
* Note: Using numbers with few digits (two- or three-digit numbers) inevitably restricts the possible supply of numbers that require more digits. For example, if the phone number 12 is assigned, the phone numbers 120 to 129 and 1200 to 1299 are no longer available.
* Note: The default exchange line access number on the PBX is 0 in the factory settings. However, this can be changed. Note that changing the exchange line access number restricts the phone numbering plan.
Name
Freely selectable name. This name is used to identify the alarm within the PBX.
Alarm type
You can select all alarm types for one alarm:
Alarm start
The Action URL will be assigned to the alarm type Alarm start. When an alarm is triggered, the Action URL is sent.
* Note: If an alarm delay time was entered, the alarm call via the Action URL starts after the alarm delay time.
Alarm acknowledged
The Action URL will be assigned to the alarm type Alarm acknowledged. As soon as an alarm subscriber (configured under Devices > Alarms > Configure > Alarm subscriber (destination number)) acknowlegded the alarm, the Action URL is sent
* Note: A device from another manufacturer that is not recognized by the PBX, cannot acknowlegde an alarm call by entering the DTMF digit 0.
Alarm timeout
The Action URL will be assigned to the alarm type Alarm timeout. If none of the alarm subscribers acknowledges the alarm, the alarm call ends after the set alarm loops and the Action URL is sent.
Link to page Devices > Alarms
 
Delets the alarm or opens the configuration of the alarm.