Information about Transfer via LDAP Server
For the transfer of contact data from the LDAP server of the PBX to the IP end device you have to enter the following values into the end device.
For the transfer of all selected contact groups (e. g. in the factory settings).
• User name cn=auerswaldschandelah,dc=auerswald
• BaseDN dc=auerswald
• Password auerswaldsecret
For the transfer of single contact groups (e. g. for contact group DECT1):
• User name cn=DECT1,dc=auerswald
• BaseDN ou=DECT1,dc=auerswald
• Password is configurable
For the transfer of contacts of a single subscriber (e. g. for the internal number 31):
• User name phoneNumber=31,dc=Subscriber number
• BaseDN dc=auerswald
• In this case the password is the user password of the subscriber.
Note: You must enter the complete character string. Note: Ensure you type the capital and lower-case letters correctly, and do not type any blank spaces before or after the , and = characters. Note: In order to avoid input errors, on page User data > Address books > Settings, in the lines below the entry and list fields you can mark and copy the user name and BaseDN. Note: In the Configuration Manager of the IP DECT server COMfortel WS-400 IP or COMfortel WS-650 IP you have to enter the user name and the BaseDN on page Administration > Phonebook in the following fields: the user name (e. g. cn=auerswaldschandelah,dc=auerswald) in the Bind user entry field and the BaseDN (e. g. dc=auerswald) in the Base entry field.