Buch1 > Using the Configuration Manager > Groups > Properties > Settings of the Group Properties > Exchange Line Settings
Exchange Line Settings
Proceed as follows:
• Separately for groups
• Using the Configuration Manager (page Groups > Properties)
GROUP
Select the group you want to display/configure.
* Important: The settings done are only valid on the condition that they are not overridden by a profile. The simultaneous display takes place on page Groups > Properties under Overridden by profile in configuration.
* Note: [Name configuration] ...: In the displayed configuration, the function is overridden by the displayed setting. Configuration using the Configuration Manager (page Groups > Profiles > ...)
* Note: not overridden by a profile: The function is currently not overridden by a profile.
* Note: (not profile-controlled): The function can not be overridden by a profile.
Exchange line authorisation | Expert
Defines which kind of phone numbers may be dialled with a group member logged in as outgoing.
International
All national and international phone numbers can be dialled.
National
All national phone numbers can be dialled.
City
All phone numbers with the same local area code can be dialled.
Exchange line dependent
The exchange line authorisation is configured under Expert separately for each connection.
As subscriber
The exchange line authorisation of the subscriber is used.
No
Emergency numbers can be dialled, if the exchange line authorisation of the subscriber permits this.
Call restrictor (outgoing)
None
No call restrictor is used for group members logged in as outgoing.
As subscriber
The call restrictor selected for a subscriber is used.
Call deblocker (outgoing)
None
No call deblocker is used for group members logged in as outgoing.
As subscriber
The call deblocker selected for a subscriber is used.
Preferred exchange line | Expert
Defines via which exchange line outgoing external calls will be routed by a group member logged in as outgoing.
Automatic occupation
For outgoing external calls, any available connection is used, whereby first the fixed network connections and then the VoIP connection and at last the GSM connections were taken into account.
Special preferred exchange lines
For outgoing external calls, the connections released under Expert are used depending on the selected priority. This makes the definition of a preferred exchange line (priority = 1) with overflow to other connections (priority > 1) possible. Exchange lines with priority No automatic occupation are not used for outgoing calls.
As subscriber
The preferred exchange line of the subscriber is used.
* Note: If all released connections are busy, it is no longer possible to call. The subscriber can only use a connection with the setting No automatic occupation by entering a character string (see Targeted Exchange Line Access).
* Note: The same priority may be allocated to different external connections in parallel.
Number presentation (outgoing) | Expert
Defines which phone number is presented by a group member logged in as outgoing.
No
The phone number is suppressed.
Standard
Both the DDI parallel to the internal number and the MSN on the PTMP connection are displayed on the PTP connection over which the group is called (if the group is not a member of the call distribution for this connection, the first MSN is presented).
Exchange line dependent
The phone number to be presented is configured separately for each external connection under Expert.
* Note: On a connection with a GSM gateway, the phone number presentation configured in the PBX is not used because the actual phone number presentation is directly configured in the individual GSM gateway.
* Note: On a connection with CLIP no screening enabled, the number presentation defined here is not considered.
* Note: For the option No, the phone service Calling Line Identification Restriction (CLIR2) must be released by the network provider.
Number presentation (incoming) | Expert
Defines which phone number is presented back to the caller by a group member logged in as outgoing.
No
The phone number is suppressed.
Standard
Both the DDI parallel to the internal number and the MSN on the PTM connection over which the group is called are presented on the PTMP connection.
Exchange line dependent
The phone number to be presented is configured separately for each external connection under Expert.
* Note: For the option No, the phone service Connected Line Identification Restriction (COLR2) must be released by the network provider.
* Note: On a connection with a GSM gateway, the phone number presentation configured in the PBX is not used because the actual phone number presentation is directly configured in the individual GSM gateway.