S2M Ports
Proceed as follows:
• Using the Configuration Manager (page Hardware > Port configuration)
Note: If the settings for the module are marked in red, the module is selected but not inserted. Note: The numbers under Port correspond to the numbers used on the board.B channel assignment type
Select the corresponding option ordered from the network provider and given in the order confirmation:
Global
The B channels are not permanently assigned.
Targeted
The B channels are assigned in selected mode.
Level adaption
In exceptional cases it may be necessary to switch level adaption on (if a very long connection line between the NTPM and the PBX causes problems, e. g. interruption of calls).
first usable B channel
Select the first B channel that was provided by your network provider or that was provided as the first one for the PBX due to restricted conditions.
incoming channels
Select the number or B channels that are available for incoming calls.
outgoing channels
Select the number of B channels which are available for outgoing calls.
incoming/outgoing channels
Select the number of B channels which are available in both directions.