Number Presentation
Important: The expert settings for the ISDN connection are settings that should only be changed if e. g. country or provider-specific particularities make it absolutely necessary.Proceed as follows:
• Using the Configuration Manager (page Public switched tel. networks > ISDN > PTMP connection > Expert configuration > Configure)
Requirements:
• Configured PTMP connection
OUTGOING CALLS (CDPN)
OUTGOING CALLS (CDPN)
CDPN of type
CDPN in format
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
CDPN receives prefix
Enter a prefix (*, #, 0-9; max. 4 digits) to send possibly necessary control commands to the provider.
CDPN receives postfix
Enter a postfix (*, #, 0-9; max. 4 digits) to send possibly necessary control commands to the provider.
CLIR
The selection of the available options for this function is provider-specific.
Info element
The called party number is sent as info element.
Dial prefix
The called party number is sent as keypad sequence. The dial prefix is provider-specific (e. g. #31).
OUTGOING CALLS (CGPN)
OUTGOING CALLS (CGPN)
Own phone number of type
Own phone number in format
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
Signalising LLC call types as
Audio 3kHz
Selection for fax devices and analogue modems (e. g. alarm systems and emergency devices).
Speech
The exchange line compresses the channel. The transferred amout of data is reduced, whereby the sound quality on the receive side could be slightly changed.
As from subscriber
The LLC call type is adopted from the subscriber.
Automatically
Audio 3kHz is preferably used. At problems with the destination, it is automatically switched to Speech.
CLIP no screening
The called party sees a customer-defined phone number instead of a phone number assgined by the network provider. The customer-defined number is not checked by the exchange line for correctness.
CLIP no screening from type
CLIP no screening in format
Requirements:
• Enabled CLIP no screening for incmong calls
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
CONNECTED CALLS (COPN)
CONNECTED CALLS (COPN)
Connected phone number of type
Connected phone number in format
Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.
Select the phone number format dependent on the phone number type.
Special encoding of the connected phone number
Standard
Must be selected in all countries except for Spain.
Spain
Must be selected in Spain.
Note: Depending on the provider, in Spain the special encoding Standard might as well be selected.FOR INCOMING CALLS
FOR INCOMING CALLS
Waiting for direct dialling (4..8 sec)
Note: This is a country-specific setting (only relevant in Austria).Enter a waiting time until the direct dialling (between 4 and 8 seconds). This is useful when the phone number is first transferred incompletely.