Accepting an Alarm Call and Confirming the Alarm
An alarm can be signalled by the ringing of an internal or external phone. To terminate the alarm loop and to switch off assigned relays, the alarm can be confirmed.
Proceed as follows:
• Using an internal or external phone
Requirements:
• DTMF-capable phone or DTMF dialler
If an alarm is signaled at an internal or external phone, proceed as follows:
1.Pick-up the receiver.
You will hear the announcement.
2.Within the next 60 seconds dial 0.
You will hear the confirmation tone.
Note: You can confirm the alarm already during the announcement. If you do not confirm the alarm (or dial a wrong digit), you will hear the busy signal and the call will be automatically terminated by the PBX. A further alarm call may be initiated after some time if the other alarm subscribers do not confirm the alarm.