Buch1 > Configuration Wizard > Network Configuration > Ethernet Configuration
Ethernet Configuration
Proceed as follows:
• Using the configuration wizard ( > Network configuration)
Receive the IP address automatically (DHCP client)
* Note: In the factory settings, DHCP is enabled.
The PBX receives its IP address automatically from the DHCP server.
Assigning IP address manually
Requirements:
• Disabled DHCP client
IP address
IPv4 address in the range 0-255 (example: 192.168.0.240).
Apply immediately
The IPv4 address is immediately applied and the PBX is routed to the new IPv4 address. Renewed registration required.
Apply at restart
The IPv4 address is not applied until the next time the PBX is restarted.
Subnet mask
IPv4 address of the subnet mask in the range 0-255 (example: 255.255.255.0).
Gateway
IPv4 address of the gateway in the range 0-255 (example: 192.168.0.2).